System Host Log Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Table 78 System Configuration Menu options
Command
date
time
timezone
idle <1-60>
notice <1-1024 character multi-
line> <'-' to end>
bannr <1-80 characters>
hprompt disable|enable
bootp disable|enable
dhcp disable|enable
reminders disable|enable
cur

System host log configuration

Command: /cfg/sys/syslog
[Syslog Menu]
host
host2
sever
sever2
facil
facil2
console
log
cur
The following table describes the Syslog Configuration Menu options.
Table 79 Syslog Configuration Menu options
Command
host <IP address>
host2 <IP address>
sever <1-7>
Usage
Prompts the user for the system date.
Configures the system time using a 24-hour clock format.
Configures the time zone where the switch resides. You are prompted
to select your location (continent, country, region) by the timezone
wizard. Once a region is selected, the switch updates the time to
reflect local changes to Daylight Savings Time, etc.
Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default
is 5 minutes.
This setting affects both the console port and Telnet port.
Displays login notice immediately before the "Enter password:"
prompt. This notice can contain up to 1024 characters and new lines.
Configures a login banner of up to 80 characters. When a user or
administrator logs into the switch, the login banner is displayed. It is
also displayed as part of the output from the
command.
Enables or disables displaying of the host name (system administrator's
name) in the command line interface.
Enables or disables the use of BOOTP. If you enable BOOTP, the
switch will query its BOOTP server for all of the switch IP parameters.
The default value is
Enables or disables Dynamic Host Control Protocol for setting the
management IP address on interface 256. When enabled, the IP
address obtained from the DHCP server overrides the static IP address.
The default value is
Enables or disables reminder messages in the CLI. The default value is
enabled
Displays the current system parameters.
- Set IP address of first syslog host
- Set IP address of second syslog host
- Set the severity of first syslog host
- Set the severity of second syslog host
- Set facility of first syslog host
- Set facility of second syslog host
- Enable/disable console output of syslog messages
- Enable/disable syslogging of features
- Display current syslog settings
.
enabled
.
enabled
.
Description
Sets the IP address of the first syslog host. For example,
100.10.1.1
Sets the IP address of the second syslog host. For example,
100.10.1.2
Sets the severity level of the first syslog host displayed. The
default is 7, which means log all the severity levels.
/info/sys/gen
Configuration Menu 91