Table of Contents
Advertisement
Introduction
The Configuration Menu is only available from an administrator login. It includes submenus
for configuring every aspect of the GbE2 Interconnect Switch. Changes to configuration are
not active until explicitly applied. Changes can be saved to non-volatile memory (NVRAM).
Configuration Menu
Command: /cfg
[Configuration Menu]
The following table describes the Configuration Menu options.
Table 6-1: Configuration Menu Options
Command
sys
port <port number>
ip
vlan <VLAN number>
stp <group number>
snmp
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
sys
- System-wide Parameter Menu
port
- Port Menu
ip
- IP Menu
vlan
- VLAN Menu
stp
- Spanning Tree Menu
snmp
- SNMP Menu
pmirr
- Port Mirroring Menu
trunk
- Trunk Group Menu
setup
- Step by step configuration set up
dump
- Dump current configuration to script file
ptcfg
- Backup current configuration to tftp server
gtcfg
- Restore current configuration from tftp server
The Configuration Menu
Usage
Displays the System Configuration Menu.
Displays the Port Configuration Menu.
Displays the IP Configuration Menu.
Displays the VLAN Configuration Menu.
Displays the Spanning Tree Configuration Menu.
Displays the SNMP Configuration Menu.
6
continued
6-1
Advertisement
Table of Contents
