Rapid Spanning Tree And Multiple Spanning Tree Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Table 22 STP parameters
Parameter
Designated port

Rapid Spanning Tree and Multiple Spanning Tree information

Command: /info/l2/stp
------------------------------------------------------------------
upfast disabled, update 40
------------------------------------------------------------------
Spanning Tree Group 1: On (RSTP)
VLANs: 1-3 4095
Current Root:
8000 00:00:01:00:19:00
Parameters:
Port
----
1
2
3
4
5
6
7
8
9
10
11
12
The switch software can be set to use the IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) or the IEEE 802.1s
Multiple Spanning Tree Protocol (MSTP). If RSTP/MSTP is turned on, you can view the following RSTP bridge
information for the Spanning Tree Group:
Status of Uplink Fast (upfast)
Current root MAC address
Path-Cost
Port
Hello interval
Maximum age value
Forwarding delay
Aging time
You can also refer to the following port-specific RSTP information:
Port number and priority
Cost
State
Role
Designated bridge and port
Link type
Description
The port ID of the port on the Designated Bridge to which this port is connected. This
information includes the port priority (hex) and the port number (hex).
Path-Cost
Priority Hello
32768 9
Prio Cost State
---- ---- ------
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DSB
0 0 DISC
0 0 FWD
0 0 FWD
Port Hello MaxAge FwdDel
0 0 9
MaxAge FwdDel
20 15
Role Designated Bridge
---- --------------------- --------
DESG 8000-00:00:01:00:19:00
DESG 8000-00:00:01:00:19:00
20 15
Aging
300
Des Port Type
----
8017 P2P2,Edge
8018 P2P
Information Menu 39