Port Rmon Statistics - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Port RMON statistics

Command: /stats/port <port number>/rmon
RMON statistics for port 2:
etherStatsDropEvents:
etherStatsOctets:
etherStatsPkts:
etherStatsBroadcastPkts:
etherStatsMulticastPkts:
etherStatsCRCAlignErrors:
etherStatsUndersizePkts:
etherStatsOversizePkts:
etherStatsFragments:
etherStatsJabbers:
etherStatsCollisions:
etherStatsPkts64Octets:
etherStatsPkts65to127Octets:
etherStatsPkts128to255Octets:
etherStatsPkts256to511Octets:
etherStatsPkts64Octets:
etherStatsPkts1024to1518Octets:
The following table describes the Remote Monitoring (RMON) statistics of the selected port:
Table 52 RMON statistics
Statistic
etherStatsDropEvents
etherStatsOctets
etherStatsPkts
etherStatsBroadcastPkts
etherStatsMulticastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
NA
0
0
0
0
0
0
0
NA
0
0
0
0
0
0
0
0
Description
The total number of packets received that were dropped because of system
resource constraints.
The total number of octets of data (including those in bad packets) received
on the network (excluding framing bits but including FCS octets).
The total number of packets (including bad packets, broadcast packets, and
multicast packets) received.
The total number of good packets received that were directed to the
broadcast address.
The total number of good packets received that were directed to a multicast
address.
The total number of packets received that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but
had either a bad Frame Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error).
The total number of packets received that were less than 64 octets long
(excluding framing bits but including FCS octets) and were otherwise well
formed.
The total number of packets received that were longer than 1518 octets
(excluding framing bits but including FCS octets) and were otherwise well
formed.
The total number of packets received that were less than 64 octets in length
(excluding framing bits but including FCS octets) and had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets (Alignment Error).
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets (Alignment Error). Jabber
is defined as the condition where any packet exceeds 20 ms. The allowed
range to detect jabber is between 20 ms and 150 ms.
The best estimate of the total number of collisions on this Ethernet segment.
Statistics Menu 69