Access Control List Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

[ACL Menu]
acl
group
cur
Use this menu to create Access Control Lists (ACLs) and ACL Groups. ACLs define matching criteria used for IP
filtering and Quality of Service functions.
The following table describes the Access Control Configuration Menu options.
Table 159 Access Control Configuration Menu options
Command
acl <1-762>
group <1-762>
cur

Access Control List configuration

Command: /cfg/acl/acl <1-762>
[ACL 1 Menu]
ethernet - Ethernet Header Options Menu
ipv4
tcpudp
meter
re-mark
pktfmt
egrport
action
stats
reset
cur
These menus allow you to define filtering criteria for each Access Control List (ACL). The following table describes the
ACL Configuration Menu options.
Table 160 ACL Configuration Menu options
Command
ethernet
ipv4
tcpudp
meter
re-mark
pktfmt
egrport <port number>
action permit|deny|setprio
stats e|d
reset
cur
- Access Control List Item Config Menu
- Access Control List Group Config Menu
- Display current ACL configuration
Description
Displays Access Control List (ACL) configuration menu.
Displays ACL Group configuration menu.
Displays the current Access Control parameters.
- IP Header Options Menu
- TCP/UDP Header Options Menu
- ACL Metering Configuration Menu
- ACL Re-mark Configuration Menu
- Set to filter specific packet format types
- Set to filter for packets egressing this port
- Set filter action
- Enable/disable statistics for this acl
- Reset filtering parameters
- Display current filter configuration
Description
Displays the ACL Ethernet configuration menu.
Displays the ACL IP version 4 configuration menu.
Displays the ACL TCP/UDP configuration menu.
Displays the ACL meter configuration menu.
Displays the ACL re-mark configuration menu.
Displays the ACL Packet Format configuration menu.
Configures the ACL to function on egress packets.
The egress port ACL will not match a Layer 2 broadcast or multicast
packet. The egress port ACL will not match packets if the destination port
is a trunk.
Configures a filter action for packets that match the ACL definitions. You
< >
0-7
can choose to permit (pass) or deny (drop) packets, or set the 802.1p
priority for the packets.
Enables or disables the statistics collection for the Access Control List.
Resets the ACL parameters to their default values and removes the ACL
from all ports to which it is assigned.
Displays the current ACL parameters.
Configuration Menu 147