Maintenance Menu; Introduction; Menu Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Maintenance Menu

Introduction

The Maintenance Menu is used for debugging purposes, enabling you to generate a technical support dump of the
critical state information in the switch, and to clear entries in the Forwarding Database and the Address Resolution
Protocol (ARP) and routing tables. This menu is available only from an administrator and operator login.

Menu information

Command: /maint
[Maintenance Menu]
sys
fdb
debug
arp
route
igmp
uudmp
ptdmp
cldmp
panic
tsdmp
pttsdmp
Dump information contains internal switch state data that is written to flash memory on the switch after any one of the
following occurs:
The switch administrator forces a switch panic. The panic option, found in the Maintenance Menu, causes the
switch to dump state information to flash memory, and then causes the switch to reboot.
The switch administrator enters the switch reset key combination (Ctrl-Shift-6) on a device that is attached
to the console port.
The switch detects a hardware or software problem that requires a reboot.
The following table describes the Maintenance Menu options.
Table 185 Maintenance Menu options
Command
sys
fdb
debug
arp
route
igmp
uudmp
ptdmp
cldmp
panic
tsdmp
pttsdmp
- System Maintenance Menu
- Forwarding Database Manipulation Menu
- Debugging Menu
- ARP Cache Manipulation Menu
- IP Route Manipulation Menu
- IGMP Multicast Group Menu
- Uuencode FLASH dump
- Upload FLASH dump via FTP/TFTP
- Clear FLASH dump
- Dump state information to FLASH and reboot
- Tech support dump
- Upload tech support dump via FTP/TFTP
Usage
Displays the System Maintenance Menu.
Displays the Forwarding Database Manipulation Menu.
Displays the Debug Menu.
Displays the ARP Cache Manipulation Menu.
Displays the IP Route Manipulation Menu.
Displays the IGMP Maintenance Menu.
Displays dump information in uuencoded format.
Saves the system dump information via FTP/TFTP.
Clears dump information from flash memory.
Dumps MP information to flash and reboots.
Dumps all switch information, statistics, and configuration.
Redirects the technical support dump (tsdmp) to an external FTP/TFTP server.
Maintenance Menu 166