Acl Ethernet Filter Configuration; Acl Ip Version 4 Filter Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

ACL Ethernet Filter configuration

Command: /cfg/acl/acl <1-762>/ethernet
[Filtering Ethernet Menu]
smac
dmac
vlan
etype
pri
reset
cur
This menu allows you to define Ethernet matching criteria for an ACL. The following table describes the Ethernet Filter
Configuration Menu options.
Table 161 Ethernet Filter Configuration Menu options
Command
smac <MAC address> <MAC mask>
dmac <MAC address> <MAC mask>
vlan <1-4095> <VLAN mask (0xfff)>
etype ARP|IP|IPv6|MPLS|RARP|any|0xXXXX
pri <0-7>
reset
cur

ACL IP Version 4 Filter configuration

Command: /cfg/acl/acl <1-762>/ipv4
[Filtering IPv4 Menu]
sip
dip
proto
tos
reset
cur
This menu allows you to define IPv4 matching criteria for an ACL. The following table describes the IP version 4 Filter
Configuration Menu options.
Table 162 IPv4 Filter Configuration Menu options
Command
sip <IP address> <IP mask>
dip <IP address> <IP mask>
- Set to filter on source MAC
- Set to filter on destination MAC
- Set to filter on VLAN ID
- Set to filter on ethernet type
- Set to filter on priority
- Reset all fields
- Display current parameters
Description
Defines the source MAC address and MAC mask for this ACL.
For example:
00:60:cf:40:56:00 ff:ff:ff:ff:ff:fc
Defines the destination MAC address and MAC mask for this
ACL. For example:
00:60:cf:40:56:00 ff:ff:ff:ff:ff:fc
Defines a VLAN number and mask for this ACL.
Defines the Ethernet type for this ACL.
Defines the Ethernet priority value for the ACL.
Resets Ethernet parameters for the ACL to their default values.
Displays the current Ethernet parameters for the ACL.
- Set to filter on source IP address
- Set to filter on destination IP address
- Set to filter on protocol
- Set to filter on TOS
- Reset all fields
- Display current parameters
Description
Defines a source IP address for the ACL. If defined, traffic with this source IP
address will match this ACL. Specify an IP address in dotted decimal notation.
For example, 100.10.1.1
Defines a destination IP address for the ACL. If defined, traffic with this
destination IP address will match this ACL. For example, 100.10.1.2
Configuration Menu 148