Ospf Host Entry Configuration; Ospf Route Redistribution Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

OSPF Host Entry configuration

Command: /cfg/l3/ospf/host <1-128>
[OSPF Host Entry 1 Menu]
addr
aindex
cost
enable
disable
delete
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Host Entry Configuration Menu options.
Table 139 OSPF Host Entry Configuration Menu options
Command
addr <IP address>
aindex <0-2>
cost <1-65535>
enable
disable
delete
cur

OSPF Route Redistribution configuration

Command: /cfg/l3/ospf/redist fixed|static|rip
[OSPF Redistribute Fixed
add
rem
export
cur
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Route Redistribution Configuration Menu options.
Table 140 OSPF Route Redistribution Configuration Menu options
Command
add <1-32> <1-32>|all
rem <1-32> <1-32> ... |all
export <1-16777215> 1|2|none
cur
- Set host entry IP address
- Set area index
- Set cost of this host entry
- Enable host entry
- Disable host entry
- Delete host entry
- Display current OSPF host entry configuration
Description
Configures the base IP address for the host entry. For example,
100.10.1.1
Configures lays the area index of the host.
Configures the cost value of the host.
Enables OSPF host entry.
Disables OSPF host entry.
Deletes OSPF host entry.
Displays the current OSPF host entries.
Menu]
- Add rmap into route redistribution list
- Remove rmap from route redistribution list
- Export all routes of this protocol
- Display current route-maps added
Description
Adds selected routing maps to the rmap list. To add all the 32 route maps,
enter . To add specific route maps, enter routing map numbers one per
all
line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
Removes the route map from the route redistribution list.
Removes routing maps from the
. To remove specific route maps, enter routing map numbers one per line,
all
NULL at end.
Exports the routes of this protocol as external OSPF AS-external LSAs in which
the metric and metric type are specified. To remove a previous configuration
and stop exporting the routes of the protocol, enter
Displays the current route map settings.
list. To remove all 32 route maps, enter
rmap
.
none
Configuration Menu 135