System Information Menu; Snmpv3 Information Menu - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

System Information Menu

Command: /info/sys
[System Menu]
snmpv3
general
log
user
dump
The following table describes the System Information Menu options.
Table 7 System Information Menu options
Command
snmpv3
general
log
user
dump

SNMPv3 Information Menu

Command: /info/sys/snmpv3
[SNMPv3 Information Menu]
usm
view
access
group
comm
taddr
tparam
notify
dump
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by
supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
- SNMPv3 Information Menu
- Show general system information
- Show last 100 syslog messages
- Show current user status
- Dump all system information
Usage
Displays the SNMP v3 Menu.
Displays system information, including:
System date and time
Switch model name and number
Switch name and location
Time of last boot
MAC address of the switch management processor
IP address of IP interface #1
Hardware version and part number
Software image file and version number
Configuration name
Log-in banner, if one is configured
Displays 100 most recent syslog messages.
Displays the User Access Information Menu.
Dumps all switch information available from the Information Menu (10K or more, depending on your
configuration).
- Show usmUser table information
- Show vacmViewTreeFamily table information
- Show vacmAccess table information
- Show vacmSecurityToGroup table information
- Show community table information
- Show targetAddr table information
- Show targetParams table information
- Show notify table information
- Show all SNMPv3 information
Information Menu 23