Show All Fdb Information; Link Aggregation Control Protocol Information - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Command Reference Manual

Show all FDB information

Command: /info/l2/fdb/dump
MAC address
-----------------
00:02:01:00:00:00
00:02:01:00:00:01
00:02:01:00:00:02
00:02:01:00:00:03
00:02:01:00:00:04
00:02:01:00:00:05
00:02:01:00:00:06
00:02:01:00:00:07
00:02:01:00:00:08
00:02:01:00:00:09
00:02:01:00:00:0a
00:02:01:00:00:0b
00:02:01:00:00:0c
An address that is in the forwarding (FWD) state indicates that the switch has learned it. When in the trunking (TRK)
state, the Trnk field displays the trunk group number. If the state for the port is listed as unknown (UNK), the MAC
address has not yet been learned by the switch, but has only been seen as a destination address. When an address
is in the unknown state, no outbound port is indicated.
Clearing entries from the forwarding database
To delete a static MAC address from the forwarding database (FDB), see the "Static FDB configuration" section in the
"Configuration Menu" chapter. To clear the entire forwarding database (FDB), see the "Forwarding Database
options" section in the "Maintenance Menu" chapter.

Link Aggregation Control Protocol information

Command: /info/l2/lacp
[LACP Menu]
aggr
port
dump
The following table describes the Link Aggregation Control Protocol Menu options.
Table 20 LACP information
Command
aggr
port
dump
VLAN Port Trnk
---- ---- ----
300
300 23
300 23
300 23
300 23
300 23
300 23
300 23
300 23
300 23
300 23
300 23
300 23
- Show LACP aggregator information for the port
- Show LACP port information
- Show all LACP ports information
State
-----
1 TRK
FWD
FWD
FWD
FWD
FWD
FWD
FWD
FWD
FWD
FWD
FWD
FWD
Usage
Displays LACP aggregator information for the port.
Displays LACP information for the port.
Displays all LACP information parameters.
Information Menu 34