Automatic Arming Option; Setting Arming Time; Enabling The Squawk Option - Visonic POWERMAXPRO User Manual

PRESS
If not satisfied
If satisfied -
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed – click
.
Note: When using the MCT-234 or MCT-237 keyfob
with the PowerMax Pro, the voice prompts must be
enabled.

Automatic Arming Option

You can determine that the system will be automatically
armed at any desired time.
Having entered master user code successfully, click
until AUTO ARM OPTION is displayed.
From here, proceed as follows:
PRESS RESULTANT DISPLAY
enable autoarm
(if this is the current option)
If not satisfied
press
disable autoarm
disable autoarm
AUTO ARM OPTION
You may now select any other item on USERS
SETTINGS menu or quit programming process by
clicking . When "<OK> TO EXIT" is
displayed, click

Setting Arming Time

Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until
the display will read:
AUTO ARM TIME
From here, proceed as follows:
D-302542
RESULTANT DISPLAY
enable prompts
(if this is the current option)
disable prompts
disable prompts
SET VOICE OPTION
.
USER SETTINGS
PRESS RESULTANT DISPLAY
arm time_ _ : _ _ A
[time
digits] (e.g. arm time 12:55 A
12:55 A)
arm time 12:55 A
AUTO ARM TIME
Notes:
1. For 12h/24h time format selection, refer to
Setting Time and Time Format below.
2. Press " " to enter A (AM), or press "#" to enter P
(PM).

Enabling the Squawk Option

You can determine that the system will activate (or
not activate) high/mid/low wireless siren sound, for a
short time, upon arming (1 beep) and disarming (2
beeps), by keyfob only.
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
the button (repeatedly, if necessary)
until the display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
If not satisfied -
If not satisfied -
If not satisfied
If satisfied
For wireless siren, refer to "low", "mid" and "hi"
options as "squawk enable".
You may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking . When "<OK> TO EXIT" is
displayed, click
RESULTANT DISPLAY
squawk disable
(if this is the current option)
squawk low volume
squawk mid volume
squawk hi volume
squawk hi volume
.
31