Automatic Arming Option; Setting Arming Time; Enabling The Squawk Option - Visonic PowerMax Complete User Manual

The presently programmed option will be shown, with
a dark selection box ( ) at the far right of the
display. You may view the other option (that does not
have a dark box at the far right) by clicking
. A dark box will appear if you click
while the other option is displayed.
To set the voice option, proceed as follows:
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
the button until the display reads:
SET VOICE OPTIONS
From here, proceed as follows:
PRESS
If not satisfied
If satisfied -
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
Note: When using the Model MCT-234 keyfob with
the PowerMaxComplete, the voice prompts must
be enabled.

Automatic Arming Option

Note: For non-partition mode only.
You can determine that the system will be
automatically armed at any desired time.
Having entered master user code successfully, click
until
displayed.
From here, proceed as follows:
PRESS RESULTANT DISPLAY
enable autoarm
(if this is the current option)
If not satisfied
press
disable autoarm
disable autoarm
AUTO ARM OPTION
D-302213
RESULTANT DISPLAY
enable prompts
(if this is the current option)
disable prompts
disable prompts
SET VOICE OPTION
AUTO ARM OPTION
You may now select any other item on USERS
SETTINGS menu or quit programming process by
clicking
displayed, click

Setting Arming Time

Note: For non-partition mode only.
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until
the display will read:
AUTO ARM TIME
From here, proceed as follows:
PRESS
[time
digits] (e.g.
12:55 A)
Notes:
1. For 12h/24h time format selection, refer to
Setting Time and Time Format below.
2. Press " " to enter A (AM), or press "#" to enter P
(PM).

Enabling the Squawk Option

You can determine that the system will activate (or
not activate) high/mid/low wireless siren sound, for a
short time, upon arming (1 beep) and disarming (2
beeps), by keyfob only.
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
is
the
until the display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
If not satisfied -
If not satisfied -
USER SETTINGS
. When "<OK> TO EXIT" is
.
RESULTANT DISPLAY
arm time_ _ : _ _ A
arm time 12:55 A
arm time 12:55 A
AUTO ARM TIME
button (repeatedly, if necessary)
RESULTANT DISPLAY
squawk disable
(if this is the current option)
squawk low volume
squawk mid volume
31