Table of Contents
Advertisement
MENUS AND FUNCTIONS
C.11 Enabling / Disabling the Squawk Option
The PowerMax10-G2 system (and its wireless sirens) can be set to produce a short "Squawk" of audible feedback
to assist you when you use your keyfob to arm (1 beep) and disarm (2 beeps) the PowerMax10-G2 system
(operates in a similar manner to a car alarm).
♦ Here you can enable / disable the Squawk.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
Enter the USER SETTINGS menu and select the [SQUAWK] option.
When the display reads [SQUAWK] press
To enable / disable or set the Squawk.
a) Click the
desired setting, for example, "Squawk ON".
b) When the display reads the desired setting, press
confirm.
A "Happy Tune"
then returns to the User Setting menu, step
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
1
2
a. The display shows the currently selected setting (indicated by a
b. You can now select either to enable (ON) or disable (OFF) the Squawk using the
buttons.
3
The
symbol now appears next to the new selected option.
4
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
32
2
or
button until the display reads the
☺
sounds. The display confirms the saved setting,
Additional Information (section C.09)
1
I
OK
.
I
OK
.
4 3
1
SQUAWK
Squawk ON
to
Squawk ON
☺ Return to
symbol), for example, "
Squawk ON
etc – see table
I
OK
or
I
OK
".
or
D-302757
Advertisement
Table of Contents
