ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Viewing Status Screens
The UTM provides real-time information in a variety of status screens that are described in the
following sections:
•
"Viewing System
•
"Viewing Active VPN Users" on page
•
"Viewing VPN Tunnel Connection Status" on page
•
"Viewing Port Triggering Status" on page
•
"Viewing the WAN Ports Status" on page
•
"Viewing Attached Devices and the DHCP Log" on page
•
"Viewing the DHCP Log" on page
Viewing System Status
The System Status screen provides real-time information about the following important
components of the UTM:
•
CPU, memory, and hard disk status, and the number of active connections per protocol.
•
Firmware versions and update information of the UTM, software versions and update
information of the components, license expiration dates for each type of license, and hardware
serial number.
•
WAN and LAN port information.
•
Interface statistics.
To view the System Status screen, click Monitoring > System Status. Because of the size of the
System Status screen, it is divided and presented in this manual in three figures
page
11-21,
Figure 11-11 on page
examples for the dual-WAN port models), each with its own table that explains the fields. For the
dual-WAN port models, the System Status screen shows information for both the WAN1 and
WAN2 port. For the single-WAN port models, the System Status screen shows information for the
single WAN port.
11-20
Status" on this page.
11-24.
11-31.
11-22, and
v1.0, January 2010
11-24.
11-26.
11-27.
11-29.
Figure 11-12 on page
Monitoring System Access and Performance
(Figure 11-10 on
11-23, all of which show