ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Figure 7-15
In the example that is shown in
connected to My Connections\UTM_SJ" within 30 seconds.
The VPN client icon in the system tray should say On:
NETGEAR VPN Client Status and Log Information
To view more detailed additional status and troubleshooting information from the NETGEAR
VPN client:
•
Right-click the VPN Client icon in the system tray and select Log Viewer (see
page
7-2).
7-18
Figure
7-15, you should receive the message "Successfully
Virtual Private Networking Using IPsec Connections
v1.0, January 2010
Figure 7-2 on