Configuring Ftp Scans - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
3. Complete the fields and select the checkbox as explained in
Table 4-14. Trusted Hosts Settings
Setting
Do Not Intercept HTTPS Connections for the following Hosts
Enable
Hosts
Add Host
Import from File
4. Click Apply to save your settings.

Configuring FTP Scans

Some malware is specifically developed to spread through the FTP protocol. By default, the STM
scans FTP traffic, but you can specify how the STM will scan FTP traffic and which action will be
taken when malware is detected.
Note: The STM does not scan password-protected FTP files.
Content Filtering and Optimizing Scans
Description
Select this checkbox to bypass scanning of trusted hosts that are listed in the
Hosts field. Users will not receive a security alert for trusted hosts that are
listed in the Host field.
This field contains the trusted hosts for which scanning will be bypassed. To
add a host to this field, use the Add Host field or the Import from File tool (see
below). You can add a maximum of 200 URLs.
delete To delete one or more hosts, highlight the hosts, and click the
delete table button.
export To export the hosts, click the export table button and follow the
instructions of your browser.
Type or copy a trusted host in the Add Host field. Then, click the add table
button to add the host to the Host field.
To import a list with trusted hosts into the Host field, click the Browse button
and navigate to a file in .txt format that contains line-delimited hosts (that is,
one host per line). Then, click the upload table button to add the hosts to the
Host field.
Note: Any existing hosts in the Host field will be overwritten when you import a
list of hosts from a file.
v1.0, September 2009
Table 4-14.
4-43