Sip Configuration Menu (Sip Phones Only); Sip General Configuration Menu - Cisco 7961G-GE - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

SIP Configuration Menu (SIP Phones Only)

SIP General Configuration Menu

Table 4-3 SIP General Configuration Menu Options
Option
Preferred CODEC
Out of Band DTMF
Register with Proxy
Register Expires
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Encrypted icon—Appears as a padlock
•
connection to the Cisco Unified Communications Manager is authenticated
and encrypted. For more information about authentication and encryption,
refer to Cisco Unified Communications Manager Security Guide.
The SIP Configuration menu contains these sub-menus:
SIP General Configuration Menu, page 4-17
•
Line Settings Menu, page 4-20
•
The SIP General Configuration menu displays information about the configurable
SIP parameters on the phone.
Description
Displays the CODEC to use when a call is
initiated. This value will always be set to
none.
Displays the configuration of the
out-of-band signaling (for tone detection
on the IP side of a gateway). The Cisco
Unified SIP IP phone supports out-of-band
signaling using the AVT tone method. This
value will always be set to avt.
Displays if the phone must register with a
proxy server during initialization. This
value will always be set to true.
Displays the amount of time, in seconds,
after which a registration request expires.
and indicates that the
Table 4-3 describes the options in this menu.
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
From Cisco Unified
Communications Manager,
choose Administration
> Device >
Device Settings > SIP Profile.
Device Configuration Menu
4-17