Cisco 7961G-GE - IP Phone VoIP Administration Manual page 198

Status Menu
Table 7-3
Item
One of the following
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Elapsed Time
Port 1
Port 2
DHCP BOUND
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
7-14
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Network Statistics Message Information (continued)
Description
Cause of the last reset of the phone
Amount of time that has elapsed since the phone last
rebooted
Link state and connection of the PC port (for
example,
PC port is in a link up state and has auto-negotiated
a full-duplex, 100-Mbps connection)
Link state and connection of the Network port
Phone is bound to the DHCP server, DHCP
parameters are acceptable, and the phone has
received a DHCPACK message.
Auto 100 Mb Full-Duplex
means that the
OL-11953-01