Disabling And Enabling Web Page Access - Cisco 7961G-GE - IP Phone VoIP Administration Manual

Disabling and Enabling Web Page Access

Disabling and Enabling Web Page Access
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
8-4
For security purposes, you may choose to prevent access to the web pages for a
phone. If you do so, you will prevent access to the web pages that are described
in this chapter and to the Cisco Unified Communications Manager User Options
web pages.
To disable access to the web pages for a phone, follow these steps from
Cisco Unified Communications Manager Administration:
Procedure
Choose Device > Phone.
Specify the criteria to find the phone and click Find, or click Find to display a list
of all phones.
Click the device name to open the Phone Configuration window for the device.
Scroll down to the Product Specific Configuration section. From the Web Access
drop-down list box, choose Disabled.
Click Update.
Some features, such as Cisco Quality Report Tool, do not function
Note
properly without access to the phone web pages. Disabling web access
also affects any serviceability application that relies on web access, such
as CiscoWorks.
To enable web page access when it is disabled, see the preceding steps about
disabling access. Follow the same steps, but choose Enabled in
the web page.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Step 4 to enable
OL-11953-01