1. Manuals
  2. Brands
  3. Cisco Manuals
  4. IP Phone
  5. 7941G - Unified IP Phone VoIP
  6. Administration manual

Cisco 7941G Administration Manual

For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7941G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administration Manual, User Manual
Cisco Unified IP Phone Settings
•
•
•
•
•
•

Phone Settings Overview

Cisco Unified IP Phones include many configurable network and device settings that you may need to modify
before the phone is functional for your users. You can access these settings, and change many of them, through
menus on the phone.

Cisco Unified IP Phone Menus

The Cisco Unified IP Phone includes the following configuration menus:
• Network Configuration: Provides options for viewing and making a variety of network settings.
• Device Configuration: Provides access to sub-menus from which you can view a variety of non
• Security Configuration: Provides options for displaying and modifying security settings.
Before you can change option settings on the Network Configuration menu, you must unlock options for
editing.
You can control whether a phone user has access to phone settings by using the Settings Access field in the
Cisco Unified Communications Manager Administration Phone Configuration window.
Phone Settings Overview, page 1
Cisco Unified IP Phone Menus, page 1
Phone Setup Options, page 4
Network Configuration Menu, page 6
Device Configuration Menu, page 26
Security Configuration Menu, page 50
network-related settings.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco 7941G

Summary of Contents for Cisco 7941G

  • Page 1: Phone Settings Overview

    Security Configuration Menu, page 50 Phone Settings Overview Cisco Unified IP Phones include many configurable network and device settings that you may need to modify before the phone is functional for your users. You can access these settings, and change many of them, through menus on the phone.
  • Page 2 You must unlock these options before you can change them. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 3 • Press the << softkey if you make a mistake. This softkey deletes the character to the left of the cursor. • Press Cancel before pressing the Save softkey to discard any changes that you have made. The Cisco Unified IP Phone provides several methods that you can use to reset or restore option settings, Note if necessary.

  • Page 4: Phone Setup Options

    There are several options on the Network Configuration menu and on the Device Configuration Menu Note that are for display only or that you can configure from Cisco Unified Communications Manager. These options are also described in this chapter. Table 1: Settings Configurable from the Phone...

  • Page 5: Table Of Contents

    Unlock and Lock Options, on page 2 Value Input Guidelines, on page 3 Network Configuration Menu, on page 6 Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 6: Display Settings Menu

    Alternate TFTP servers for IPv4. For more information on the IPv4 address fields, see the specific field within this table. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 7 Admin VLAN ID option. VLAN. If neither the auxiliary VLAN nor the Administrative VLAN are configured, this option is blank. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 8 If you change the setting of this option, you must change the SW Port Configuration option to the same setting. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 9: Subnet Mask

    Router 1) and optional backup routers Default Router 2 (Default Router 2–5). Default Router 3 Default Router 4 Default Router 5 Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 10: Dns Server 1

    Alternate TFTP Indicates whether the phone is using an Set Alternate TFTP Field, on page 21 alternative TFTP server. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 11: Tftp Server 1

    Security Guide. For information about unlocking CTL and ITL files, see Unlock CTL and ITL Files, on page Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 12 Bootstrap Protocol (BootP) server instead of from a DHCP server. The following table describes the IPv6 configuration menu options. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 13: Dhcpv6

    Display only—Cannot configure. Router 1). The phone obtains information on Note the default router from IPv6 Router Advertisements. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 14: Ipv6 Dns Server

    Indicates whether the phone is using the Set IPv6 Alternate TFTP Field, on IPv6 Alternate TFTP server. page 24 Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 15 Manager Security Guide. For information about unlocking the CTL file, see Unlock CTL and ITL Files, on page Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 16: Ipv6 Tftp Server 2

    Procedure Step 1 Unlock network configuration options. Step 2 Scroll to IPv4 Configuration and press the Select softkey. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 17: Set Ipv6 Configuration Fields

    Step 4 Press Edit. Step 5 Enter a new domain name. Step 6 Press Validate. Step 7 Press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 18: Set Admin Vlan Id Field

    Scroll to the PC Port Configuration option and then press Edit. Step 3 Scroll to the setting that you want and then press Select. Step 4 Press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 19: Set Pc Vlan Field

    Scroll to the IP Address option, press Edit and enter a new IP Address. Step 4 Press Validate and Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 20: Set Subnet Mask Field

    Step 5 Repeat Steps 3 and 4 as needed to assign backup DNS servers. Step 6 Press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 21: Set Dhcp Address Released Field

    Scroll to the TFTP Server 1 option, press Edit, and then enter a new TFTP server IP address. Step 4 Press Validate, and then press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 22: Set Tftp Server 2 Field

    Scroll to the IP Address option, press Edit, and then enter a new IP Address. Step 4 Press Validate and then press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 23: Set Ipv6 Prefix Length Field

    Step 5 Repeat Steps 3 and 4 as needed to assign the backup DNS server. Step 6 Press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 24: Set Dhcpv6 Address Released Field

    Scroll to the IPv6 TFTP Server 1 option, press Edit, and then enter a new TFTP server IP address. Step 4 Press Validate, and then press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 25: Set Ipv6 Tftp Server 2 Field

    Configuration setting is ignored. Enabled Disabled The DHCP server assigns the IP address and the other network settings to the phone. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 26: Device Configuration Menu

    Communications Manager Administration, Cisco Unified CM Group Configuration. For an available Cisco Unified Communications Manager server, an option on the Unified CM Configuration menu will show the Cisco Unified Communications Manager server IP address or name and one of the states shown in the following table.

  • Page 27: Sip Configuration Menu For Sip Phones

    Protected calls are not authenticated. SIP Configuration Menu for SIP Phones The SIP Configuration menu contains these sub-menus: Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 28: Sip General Configuration Menu

    Displays if Network Address Translation Display only. Cannot configure. (NAT) is enabled. This value will always be set to false. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 29 The value is left blank because it is not applicable to SIP Phones that are using Cisco Unified Communications Manager. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 30: Call Preferences Menu For Sip Phones

    Use Cisco Unified Communications logs is enabled (Yes) or disabled Manager Administration to modify. (No) for the phone. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 31: Http Configuration Menu

    This menu also displays information about the idle display on the phone. Note Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This includes hostname which maps to an IPv6 address for directories, services, messages, and information URLs. If you support phone use of URLs, you must configure the phone and the servers that provide URL services with IPv4 addresses.

  • Page 32: Locale Configuration Menu

    The Locale Configuration menu displays information about the user locale and the network locale used by the phone. The following table describes the options on this menu. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 33 The NTP Configuration menu displays information about the NTP server and mode configuration used by SIP Phones. The following table describes the options on this menu. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 34: Ui Configuration Menu

    Indicates if the Busy Lamp Field (BLF) is From Cisco Unified enabled for call lists. Communications Manager Administration, choose System > Enterprise Parameters. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 35 Phone > Phone Configuration. display reverts to the initial softkeys. Range: 5 to 30; 0 represents an infinite timer. Default: 5 Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 36: Media Configuration Menu

    The following table describes the options on this menu. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 37 Manager Administration, choose Device connected to an appropriately equipped > Phone > Phone Configuration. computer. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 38 (same level as current volume setting on the phone). Default: 100 See Recording Tone in this table. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 39 If you allow this option to be user Note controllable (in the Wideband Handset UI Control option), the user-configured value takes precedence. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 40: Ethernet Configuration Menu

    Ethernet Configuration Menu The Ethernet Configuration menu includes the options that are described in the following table. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 41: Security Configuration Menu

    Security Configuration Menu, on page The following table describes the options on the Security Configuration menu. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 42: Qos Configuration Menu

    The QoS Configuration menu displays information that relates to quality of service (QoS) for the phone. The following table describes the options on this menu. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 43 The phone also has a Network Configuration menu that you access directly from the Settings menu. For Note information about the options on that menu, see Network Configuration Menu, on page Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 44 0. For additional information, see the following sections: • Call Statistics Screen • Streaming Statistics Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 45 The current PC and switch port Note CDP values are shown on the Settings menu. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 46 Firmware Sharing feature. The remote logging setting does Note not affect the sharing log messages sent to the phone log. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 47 IPv6 Communications Manager only, or IPv4 and IPv6. Administration, choose Device > Device Settings > Common Device Configuration. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 48 DHCPv6 and Autoconfiguration, on page Note Use the “Allow Auto-Configuration for Phones” setting in Cisco Unified Communications Manager Administration. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 49 Related Topics Display Settings Menu, on page 2 Network Configuration Menu, on page 6 Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 50 CTL File reboots or resets. screen. For more information, see File Submenu, on page Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 51: Ctl File Submenu

    If a CTL file is installed on the phone, you can access the CTL File submenu by pressing the Settings button and choosing Security Configuration > Trust List. To exit the CTL File submenu, press Exit. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 52 To unlock the CTL and ITL files from the Security Configuration menu, perform these steps: Procedure Step 1 Press **# to unlock options on the overall setting menu of the Cisco Unified IP Phone. Step 2 Select Trust List > CTL or ITL file depending on which file is installed in your phone.

  • Page 53: Itl File Submenu

    TFTP (TFTP Server 2) is not in the CTL or ITL file, you must unlock the CTL file. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 54: Trust List Menu

    Cisco Unified Communications Manager Security Guide. displays a certificate icon if a certificate is installed for this server. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 55: X Authentication And Status

    You can access the 802.1X Authentication settings by pressing Settings and choosing one of the following: • To configure your 802.1x authentication, choose Security Configuration > 802.1X Authentication Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 56 Realm: Indicates the user network Display only—Cannot configure. domain, always set as Network. The following table describes the 802.1X Authentication Real-Time Status. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 57: Set Device Authentication Field

    Procedure Step 1 Choose EAP-MD5 > Shared Secret. Step 2 Enter the shared secret. Step 3 Press Save. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 58: Vpn Configuration

    When the power is lost or in some scenarios when the phone is reset, all stored credentials are Note removed. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

  • Page 59: Vpn Configuration Fields

    VPN Configuration screen. • For an unconfigured concentrator, no status displays, and the Select softkey is inactive. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
  • Page 60 • AES128-SHA • AES256-SHA • DES-CBC3-SHA If VPN is not connected, no method is shown. Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

This manual is also suitable for:

7941g-ge7942g7961g7961g-ge7962g

Table of Contents