X Authentication And Status - Cisco 7961G-GE - IP Phone VoIP Administration Manual

Security Configuration Menu
Table 4-17 Trust List Menu Settings
Option Description
CAPF Server IP address of the CAPF used by the
phone. Also displays a certificate icon
server.
CallManager/ IP address of up to five Cisco Unified
TFTP Server Communications Manager and TFTP
servers used by the phone. Also
displays a certificate icon
certificate is installed for this server.
SRST Router IP address of the trusted SRST router
that is available to the phone, if such a
device has been configured in Cisco
Unified Communications Manager
Administration. Also displays a
certificate icon
installed for this server.

802.1X Authentication and Status

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
4-48
if a certificate is installed for this
if a certificate is
The 802.1X Authentication and 802.1X Authentication Status menus allow you to
enable 802.1X authentication and monitor its progress. These options are
described in Table 4-18
You can access the 802.1X Authentication settings by pressing the Settings button
and choosing Security Configuration > 802.1X Authentication.
To exit these menus, press the Exit softkey.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
For more information about this file, refer
to the "Configuring the Cisco CTL
Client" section in Cisco Unified
Communications Manager Security
Guide.
For more information about this file, refer
to the "Configuring the Cisco CTL
Client" section in Cisco Unified
if a Communications Manager Security
Guide.
For more information about this file, refer
to the "Configuring the Cisco CTL
Client" section in Cisco Unified
Communications Manager Security
Guide.
and Table 4-19.
OL-11953-01