Chapter 5
Configuring Features, Templates, Services, and Users
Managing the User Options Web Pages
Giving Users Access to the User Options Web Pages
Specifying Options that Appear on the User Options Web Pages
Note
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
From the User Options web page, users can customize and control several phone
features and settings. For detailed information about the User Options web pages,
refer to Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Phone
Guide.
Before a user can access the User Options web pages, you must use Cisco Unified
Communications Manager Administration to add the user to a standard Cisco
Unified Communications Manager end user group: choose User Management >
User Groups.
For additional information, refer to Cisco Unified Communications Manager
Administration Guide, "End User Configuration" section.
Most options on the User Options web pages appear by default. However, two
options that do not appear by default are:
Show Ring Settings
•
Show Line Text Label Settings
•
You can control the options that appear on the User Options web pages by using
enterprise parameter settings in Cisco Unified Communications Manager
Administration.
The settings apply to all User Options web pages at your site.
To specify the options that appear on the User Options web pages, follow these
steps:
Managing the User Options Web Pages
5-31