Cisco 7961G-GE - IP Phone VoIP Administration Manual page 103

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
DNS Server 1 Primary Domain Name System (DNS) server
(DNS Server 1) and optional backup DNS
DNS Server 2
servers (DNS Server 2–5) used by the phone.
DNS Server 3
DNS Server 4
DNS Server 5
Operational Auxiliary Virtual Local Area Network (VLAN)
VLAN ID configured on a Cisco Catalyst switch in which
the phone is a member.
If the phone has not received an auxiliary
VLAN, this option indicates the Administrative
VLAN.
If neither the auxiliary VLAN nor the
Administrative VLAN are configured, this
option is blank.
Admin. VLAN Auxiliary VLAN in which the phone is a
ID member.
Used only if the phone does not receive an
auxiliary VLAN from the switch, ignored
otherwise.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Network Configuration Menu
To Change
Unlock network
1.
configuration options.
Set the DHCP Enabled
2.
option to No.
Scroll to the appropriate
3.
DNS Server option, press
the Edit softkey, and then
enter a new DNS server IP
address.
Press the Validate softkey.
4.
Repeat Steps 3 and 4 as
5.
needed to assign backup
DNS servers.
Press the Save softkey.
6.
The phone obtains its
Operational VLAN ID via Cisco
Discovery Protocol (CDP) from
the switch to which the phone is
attached. To assign a VLAN ID
manually, use the Admin VLAN
ID option.
Unlock network
1.
configuration options.
Scroll to the Admin. VLAN
2.
ID option, press the Edit
softkey, and then enter a new
Admin VLAN setting.
Press the Validate softkey
3.
and then press the Save
softkey.
4-11