Telephony Features Available for the Cisco Unified IP Phone
Table 5-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Do Not Disturb
(DND)
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
5-12
Description
When DND is turned on, no audible rings
occur during the ringing-in state of a call.
You can configure the phone to have a
softkey template with a DND softkey or a
phone-button template with DND as one of
the selected features.
The following DND-related parameters are
configurable in Cisco Unified
Communications Manager administration:
Do Not Disturb—This checkbox allows
•
you to enable DND on a per-phone
basis. Use Cisco Unified
Communications Manager
Administration > Device > Phone >
Phone Configuration.
•
DND Incoming Call Alert—Choose the
type of alert to play on a phone for
incoming calls when DND is active.
This parameter is located on both the
Common Phone Profile page and the
Phone configuration page (Phone page
value takes precedence).
Include DND In BLF Status—Enables
•
DND status to override busy/idle state.
Chapter 5
Configuring Features, Templates, Services, and Users
Configuration Reference
Cisco Unified Communications
Manager Features and Services
Guide, "Do Not Disturb" chapter.
OL-11953-01