Cisco 7961G-GE - IP Phone VoIP Administration Manual page 110

Device Configuration Menu
Table 4-3 SIP General Configuration Menu Options (continued)
Option
Phone Label
Enable VAD
Start Media Port
End Media Port
Backup Proxy
Backup Proxy Port
Emergency Proxy
Emergency Proxy
Port
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
4-18
Description
Displays the text that is displayed on the
top right status line of the LCD on the
phone. This text is for end-user display
only and has no effect on caller
identification or messaging. This value
will always be set to null.
Displays if voice activation detection
(VAD) is enabled.
Displays the start Real-Time Transport
Protocol (RTP) range for media.
Displays the end Real-Time Transport
Protocol (RTP) range for media.
Displays the IP address of the backup
proxy server or gateway. This value will
always be set to USECALLMANAGER.
Displays the port number of the backup
proxy server or gateway. This value will
always be set to 5060.
Displays the IP address of the emergency
proxy server or gateway. This value will
always be set to USECALLMANAGER.
Displays the port number of the
emergency proxy server or gateway. This
value will always be set to 5060.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Display only—cannot configure.
From Cisco Unified
Communications Manager
administration, choose
> Device >
Device Settings > SIP Profile.
From Cisco Unified
Communications Manager
administration, choose
> Device >
Device Settings > SIP Profile.
From Cisco Unified
Communications Manager
administration, choose
> Device >
Device Settings > SIP Profile.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
OL-11953-01