Cisco 7961G-GE - IP Phone VoIP Administration Manual page 127

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-10 Media Configuration Menu Options (continued)
Option Description
Enterprise Enables/disables Cisco Unified IP Phones to
Advertise G.722 advertise the G.722 codec to Cisco Unified
Codec Communications Manager. If enabled (default),
and if each endpoint in the attempted call supports
G.722 in its capabilities set, Cisco Unified
Communications Manager will choose G.722 for
the call.
Note
Device Advertise Allows you to override the Enterprise Advertise
G.722 Codec G.722 Codec on a per-phone basis.
The default is "Use System Default," which means
the value configured for the Enterprise Advertise
G.722 Codec parameter gets used.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
When a phone is registered with a Cisco
Unified Communications Manager that
does not support this setting, the default is
"Disabled."
Device Configuration Menu
To Change
Use Cisco Unified
Communications Manager
Administration > System >
Enterprise Parameters.
Use Cisco Unified
Communications Manager
Administration > Device >
Phone.
4-35