Device Logs - Cisco 7961G-GE - IP Phone VoIP Administration Manual

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-4 Access Area and Network Items (continued)
Item
Tx Collisions
Tx excessLength
Tx broadcast
Tx multicast
Neighbor Device ID
Neighbor IP Address
Neighbor Port

Device Logs

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Description
Total number of collisions that occurred while a packet was being transmitted
Total number of packets not transmitted because the packet experienced 16
transmission attempts
Total number of broadcast packets transmitted by the phone
Total number of multicast packets transmitted by the phone
Identifier of a device connected to this port
IP address of the neighbor device
Neighbor device port to which the phone is connected
The following device logs hyperlinks on a phone's web page provide information
you can use to help monitor and troubleshoot the phone. To access a device log
area, access the web page for the phone as described in the
Page for a Phone" section on page
Console Logs—Includes hyperlinks to individual log files. The console log
•
files include debug and error messages received on the phone.
Core Dumps—Includes hyperlinks to individual dump files. The core dump
•
files include data from a phone crash.
Status Messages—Displays up to the 10 most recent status messages that the
•
phone has generated since it was last powered up. You can also see this
information from the Status Messages screen on the phone.
describes the status messages that can appear.
Debug Display—Displays debug messages that might be useful to Cisco TAC
•
if you require assistance with troubleshooting.
8-2.
Device Logs
"Accessing the Web
Table 7-2
8-13