Cisco 7961G-GE - IP Phone VoIP Administration Manual page 146

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Auto-pickup
Barge
Block external to
external transfer
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
5-4
Description
Allows a user to use one-touch, pickup
functionality for call pickup, group call
pickup, and other group call pickup.
Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.
cBarge adds a user to a call and
•
converts it into a conference, allowing
the user and other parties to access
conference features.
Barge adds a user to a call but does not
•
convert the call into a conference.
The phones support Barge in two
conference modes:
Built-in conference bridge at the target
•
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
•
uses the cBarge softkey.
Prevents users from transferring an external
call to another external number.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to:
•
•
For more information, refer to:
•
•
•
For more information, refer to
Cisco Unified Communications
Manager Features and Services
Guide, "External Call Transfer
Restrictions" chapter.
Cisco Unified
Communications Manager
Administration Guide,
"Pickup Group Configuration"
chapter.
Cisco Unified
Communications Manager
System Guide, "Call Pickup
and Group Call Pickup"
chapter.
Cisco Unified
Communications Manager
Administration Guide, "Cisco
Unified IP Phone
Configuration" chapter.
Cisco Unified
Communications Manager
System Guide, "Cisco Unified
IP Phones" chapter.
Cisco Unified
Communications Manager
Features and Services Guide,
"Barge and Privacy" chapter.
OL-11953-01