Ntp Configuration Menu - Cisco 7961G-GE - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

NTP Configuration Menu

Table 4-8 NTP Configuration Menu Options
Option Description
NTP Server 1 IP address of the primary NTP server.
NTP Server 2 IP address of the secondary or backup
NTP server.
NTP Mode 1 Primary server mode. Supported modes
are Directed Broadcast and Unicast.
NTP Mode 2 Secondary server mode. Supported
modes are Directed Broadcast and
Unicast.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
The NTP Configuration menu, which opens when you select NTP Configuration
on the Locale Configuration menu, displays information about the NTP server and
mode configuration used by the phone.
menu. For more information, see
Table 4-8 describes the options on this
Locale Configuration Menu, page
To Change
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Display only—cannot configure.
Device Configuration Menu
4-24.
4-25