Cisco 7961G-GE - IP Phone VoIP Administration Manual page 75

Chapter 3 Setting Up the Cisco Unified IP Phone
Understanding the Cisco Unified
IP Phone 7961G/7961G-GE and 7941G/7941G-GE
Components
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Understanding the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Components
If you plan to use auto-registration, verify that it is enabled and properly
configured in Cisco Unified Communications Manager before connecting any
Cisco Unified IP Phone to the network. For information about enabling and
configuring auto-registration, refer to Cisco Unified Communications Manager
Administration Guide. Also, see the
Unified Communications Manager Database" section on page
You must use Cisco Unified Communications Manager to configure and assign
telephony features to the Cisco Unified IP Phones. See the
Available for the Cisco Unified IP Phone" section on page 5-2
In Cisco Unified Communications Manager, you can add users to the database
and associate them with specific phones. In this way, users gain access to web
pages that allow them to configure items such as call forwarding, speed dialing,
and voice messaging system options. See the
Unified Communications Manager" section on page 5-30
The Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE includes
these components on the phone or as accessories for the phone:
Network and Access Ports, page 3-4
•
Handset, page 3-4
•
Speakerphone, page 3-5
•
Headset, page 3-5
•
"Adding Phones to the Cisco
"Adding Users to Cisco
for details.
2-13.
"Telephony Features
for details.
3-3