Cisco 7961G-GE - IP Phone VoIP Administration Manual page 104

Network Configuration Menu
Table 4-2 Network Configuration Menu Options (continued)
Option Description
DHCP Enabled Indicates whether DHCP is being used by the
phone.
DHCP Address Releases the IP address assigned by DHCP.
Released
Alternate TFTP Indicates whether the phone is using an
alternative TFTP server.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
4-12
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
1.
2.
3.
1.
2.
3.
1.
2.
3.
Unlock network
configuration options.
Scroll to the DHCP Enabled
option and press the No
softkey to disable DHCP, or
press the Yes softkey to
enable DHCP.
Press the Save softkey.
Unlock network
configuration options.
Scroll to the DHCP Address
Released option and press
the Yes softkey to release the
IP address assigned by
DHCP, or press the No
softkey if you do not want to
release this IP address.
Press the Save softkey.
Unlock network
configuration options.
Scroll to the Alternate TFTP
option and press the Yes
softkey if the phone should
use an alternative TFTP
server. Press the No softkey
otherwise.
Press the Save softkey.
OL-11953-01