Cisco 7961G-GE - IP Phone VoIP Administration Manual page 84

Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones Only)
The Find and List Phone page appears. You can search for one or more phones
that you want to configure for the Cisco Unified IP Phone Expansion Module
7914.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone page reappears showing a list of the phones matching
your search criteria.
Click the IP Phone that you want to configure for the Cisco Unified IP Phone
Step 4
Expansion Module 7914.
The Phone Configuration page appears.
Scroll to the Expansion Module Information section of the page.
Step 5
To add support for one expansion module, in the Module 1 field, select
Step 6
7914 14-Button Line Expansion Module.
To add support for a second expansion module, in the Module 2 field, select
7914 14-Button Line Expansion Module.
In the Firmware Load Information section of the page, there are two fields for
specifying the firmware load for Modules 1 and 2. You can leave these fields blank
to use the default firmware load.
Scroll to the top of the page and click Update.
Step 7
A message appears asking you to reset the phone for the changes to take effect.
Click OK.
Step 8 Click Reset Phone for the changes to take effect.
Refer users to their Cisco Unified Communications Manager User Options web
Note
pages so that they can configure speed dial buttons and program buttons to access
phone services on the Cisco Unified IP Phone Expansion Module 7914. See the
"How Users Subscribe to Services and Configure Phone Features" section on
page A-4
Related Topic
•
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
3-12
for more details.
Configuring Softkey Templates, page 5-28
Chapter 3 Setting Up the Cisco Unified IP Phone
OL-11953-01