Cisco 7961G-GE - IP Phone VoIP Administration Manual page 158

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Immediate
Divert—Enhanced
Intercom
Join
(SCCP phones
only)
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
5-16
Description
Allows users to transfer incoming calls
directly to their voice messaging system or to
the voice messaging system of the original
called party.
Allows users to place and receive intercom
calls using programmable phone buttons.
You can configure intercom line buttons to:
Directly dial a specific intercom
•
extension.
Initiate an intercom call and then
•
prompt the user to enter a valid
intercom number.
Cisco Extension Mobility does not
Note
support intercom lines.
Allows user to join two or more calls that
are on one line to create a conference call
and remain on the call.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to:
•
•
Cisco Unified Communications
Manager Feature and Services
Guide, "Intercom chapter"
For more information:
•
•
Cisco Unified
Communications Manager
System Guide, "Cisco Unified
IP Phones" chapter.
Cisco Unified Communications
Manager Features and
Services Guide, "Call Park and
Directed Call Park" chapter
See the "Configuring Softkey
Templates" section on
page 5-28.
Refer to Cisco
Unified Communications
Manager System Guide,
"Cisco Unified IP Phones"
chapter.
OL-11953-01