Cisco 7961G-GE - IP Phone VoIP Administration Manual page 135

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-14 Network Configuration Menu Options (continued)
Option Description
CDP: PC Port Indicates whether CDP is enabled on the PC port
(default is enabled).
Enable CDP on the PC port when Cisco VT
Advantage/Unified Video Advantage (CVTA) is
connected to the PC port. CVTA does not work
without CDP interaction with the phone.
Note
Note
CDP: SW Port Indicates whether CDP is enabled on the switch
port (default is enabled).
•
•
Note
Note
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
displayed, indicating that disabling CDP
on the PC port prevents CVTA from
working.
The current PC and switch port CDP
values are shown on the Settings menu.
Enable CDP on the switch port for VLAN
assignment for the phone, power negotiation,
QoS management, and 802.1x security.
Enable CDP on the switch port when the
phone is connected to a Cisco switch.
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
presented, indicating that CDP should be
disabled on the switch port only if the
phone is connected to a non-Cisco switch.
The current PC and switch port CDP
values are shown on the Settings menu.
Related Topics
Displaying a Configuration Menu, page 4-2
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu
To Change
Use Cisco Unified
Communications Manager
Administration > Device >
Phone.
Use Cisco Unified
Communications Manager
Administration > Device >
Phone.
4-43