Cisco 7961G-GE - IP Phone VoIP Administration Manual page 156

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Forced
authorization codes
(FAC)
(SCCP phones
only)
Group call pickup
Hold
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
5-14
Description
Controls the types of calls that certain users
can place.
Allows a user to answer a call ringing on a
phone in another group by using a group
pickup code.
Allows the user to move a connected call
from an active state to a held state.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to:
•
•
For more information, refer to:
•
•
•
•
Cisco Unified
Communications Manager
System Guide, "Forced
Authorization Codes (FAC)"
chapter.
Cisco
Unified Communications
Manager Features and
Services Guide, "Client
Matter Codes and Forced
Authorization Codes" chapter.
Cisco Unified
Communications Manager
Administration Guide,
"Pickup Group
Configuration" chapter.
Cisco Unified
Communications Manager
System Guide, "Call Pickup"
chapter.
Requires no configuration,
unless you want to use music
on hold. See "Music-on-Hold"
in this table for information.
See also: "Hold Reversion" in
this table.
OL-11953-01