Line Settings; Incoming Call Forwarding; Message Waiting Lamp; Audible Message Waiting Indicator - Cisco 9951 User Manual

more then one phone associated to your account will have a drop down box with several
phones listed.
Each phone has its own configuration settings it is important that you have the correct phone selected
for the remainder of the instructions.
The "model" of the phone is the model of the phone by that name. It should match the
model number on your phone (usually upper right corner on the phone). Depending on
your phone model different options will be available.
The "description" will usually be your name – extension.
Lastly, the "user guide" will be a PDF document that you can download. The user guide
provided here is one from the manufacture and provides more details then this document.

Line Settings

To change phone settings press the "Line Settings" option at the top of the page.
On this page you will see several options. If you phone has more then one line you will
need to select which line you would like to configure from the left hand menu. By
default your primary line is selected.

Incoming Call Forwarding

You will see several forwarding options for your phone. By default some items
have been selected by the administrator.
The "Forward all calls to" option works with the CFwdALL option available on
the phone. Generally, you should forward your phone from the actual phone
unless you are offsite and forgot to set your CFwdALL variable from the phone.

Message Waiting Lamp

This option allows you to change your message waiting lamp indicator settings.
By default the system is set to light and prompt. You shouldn't need to change
this setting unless you don't like the light/prompt notification of new voicemail.

Audible Message Waiting Indicator