Table of Contents
Advertisement
2.If it is to connect for the first time a drive will be installed on the PC automatically. If it is
successfully installed, a wireless icon will appear in the tray of taskbar on the right-down corner
of the PC screen.
3.Selecting Phone and modem options from control panel of PC and switching to Modem after
'
opening the dialog box, you will see a successfully linked modem in the modem list, normally
named as Standard Modem over IR link . If several Infrared transmit modems have been
'
installed, it may be named as Standard Modem over IR link #n , n is plus integer, such as 1, 2, 3,
'
etc. Certain connecting COM port will be displayed after the modem, such as COM3, COM4, etc.
4.Select the modem of Standard Modem over IR link #n connected to certain COM port and
'
press Property button on the dialog box to set the property of the modem. Switch to Advanced
'
'
and input
at+cgdcont=1, IP , cmnet
'
' '
should confirm to save.
5.Open Network and dial connection from the control panel of PC. Then select New
'
connection and press Next according to screen reminding. Then select network-connecting
'
'
'
type as Dial to Internet and press Next to select to manually set Internet connection or make it
'
'
connect through LAN. Then press Next to select Connect with modem through phone line .
Then press Next to select the successfully connected modem of Standard Modem over IR link .
'
'
Then press Next .
'
'
6.Then it begins to allocate connecting account information. You can input
'
'
'
'
'
in Additional initializing order inputting box. Finally you
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
*98*1#
in the phone
49
Advertisement
Table of Contents
