Cabling A Desktop Storage Device; Adding Options - NEC POWERMATE VP Manual

Cabling a Desktop Storage Device

Replace the front panel. Secure the panel in place with
5.
the five screws you removed earlier.
Insert the device, connector end first, into the device
6.
slot.
To easily access device connectors for ca-
bling, do not insert a 5 1/4-inch device all the way
into the slot.
Continue to "Cabling a Desktop Storage Device."
7.
Use the following procedure to cable a storage device in
the system and reinstall the parts you removed earlier.
Connect the device cables as follows:
1.
n
Connect the PCI/IDE cable and power cable (see
"PCI/IDE Cables" in this chapter).

Adding Options 6-49