NEC POWERMATE VP Manual page 34

n
Line In Jack
The Line In Jack allows you to connect devices such as
a cassette, DAT, or Minidisc player to your sound
board for playback or recording.
n
Microphone In Jack
The Microphone In (MIC) Jack allows you to connect a
microphone for voice input.
n
Line Out Jack
The Line Out Jack allows you to bypass your sound
board's internal amplifier to connect powered speakers
or an external amplifier for audio output. (Use this jack
for the speakers shipped with your system.)
n
Speaker Jack
The Speaker Jack allows you to connect speakers for
audio output from the sound board's built-in power
amplifier. The built-in amplifier has a maximum output
power of four watts per channel from four-ohm
speakers and two watts per channel from eight-ohm
speakers. Do not play at maximum volume if your
speakers cannot handle this power. (Use this jack if you
connect unamplified speakers or headphones.)
n
MIDI/Joystick Connector
The MIDI/Joystick Connector allows you to connect a
joystick or MIDI kit to your sound board.
The joystick connector on your sound board is identical
to that on a standard PC game control adapter or game
I/O connector. You can connect any analog joystick
with a 15-pin D-sub connector. It also works well with
any application that is compatible with the standard PC
joystick. To use two joysticks, you need a Y-cable
splitter.
Using Your Computer 1-19