7
Setting System Board
Jumpers
This chapter provides jumper setting information for con-
figuring your system for a particular system requirement.
Situations that require changing the jumper settings in-
clude the following:
n
You are changing bank 0 SIMMs from single- to
double-sided SIMMs or vice versa.
n
You are upgrading the processor and clock speed.
CAUTION: The jumpers are set correctly at
the factory for your configuration.
If your system requires a jumper change, change
only the jumper setting for that condition. Otherwise,
keep the jumpers at their factory settings.
Setting System Board Jumpers 7-1