NEC POWERMATE VP Manual page 102

4-8 Maintaining Your Computer
Remove any diskette from the diskette drive.
2.
Turn off the system unit and any external options con-
3.
nected to it.
Unplug the system unit power cable from the wall out-
4.
let or surge suppressor, then from the unit.
Unplug any external options from the wall outlets or
5.
surge suppressor, then disconnect them from the system
unit.
Pack the system components in the original shipping
6.
materials and cartons. If these are not available, be
sure to use adequate packing materials to protect
the components.
To set up your system, follow the instructions on the NEC
PowerMate VP Systems Quick Setup sheet.