NEC POWERMATE VP Manual page 137

Remove the system cover (see Chapter 5).
1.
WARNING: Be sure that the system unit
power is turned off and the system is unplugged
before you begin the installation procedure.
Locate the SIMM sockets and jumper JP1 on the sys-
2.
tem board. The SIMM sockets are assigned as bank 0
and bank 1.
If you have cables obstructing your view of the sockets,
move them aside or unplug them. Tag any cables you
unplug.
Locating SIMM sockets and banks
Adding Options 6-23