Minitower Device Slots - NEC POWERMATE VP Manual

Minitower Device Slots

The minitower system has six device slots:
n
One 3 1/2-inch accessible device slot which contains
the standard 1.44-MB diskette drive.
n
Three 5 1/4-inch accessible device slots for 1.6-inch
high (half-height) devices (one slot contains the CD-
ROM reader in multimedia configurations).
n
Two internal 3 1/2-inch device slots (one slot contains
the standard IDE hard disk in hard disk configurations).
You can install accessible devices such as a diskette
drive or tape drive with a 5 1/4-inch form factor
(frame) in the 5 1/4-inch slots. To install a hard disk in
the 5 1/4-inch slots a 5 1/4-inch form factor is required.
The following figure shows the device slot locations.
Locating minitower device slots
Adding Options 6-39