Replacing The Bottom Access Cover - NEC POWERMATE VP Manual

Replacing the Bottom Access Cover

5-12 Removing the System Unit Cover
Use the following steps to replace the bottom access cover.
Align the access cover with the bottom of the chassis.
1.
Position the tabs on the access cover over the cutouts in
2.
the chassis (see the following figure).
Replacing the minitower bottom access cover
Press the access cover against the bottom of the chassis
3.
until the tabs are down in the cutouts.
Slide the access cover to the right until the cover locks
4.
in place.
Secure the access cover with the screw.
5.
Turn the system upright.
6.
Connect the monitor, keyboard, mouse, and any other
7.
external options to the rear of the system.
Plug in the power cables.
8.