Hard Disk - NEC POWERMATE VP Manual

Table of Contents

Advertisement

Hard Disk

You must format a new diskette before
storing information on it. Use the MS-DOS FORMAT
command. See your MS-DOS documentation for in-
formation about formatting a diskette.
CAUTION: Do not format your hard disk
drive, this will erase all preinstalled applications.
To remove a diskette from the diskette drive, press the
release button on the 3 1/2-inch drive.
CAUTION: Do not remove a diskette
from the diskette drive when the diskette drive lamp
is lit. To do so can damage both the data on the
diskette and the drive.
Do not turn off the system power while the diskette is
being accessed.
Do not reset the system (except as a last resort)
when the diskette drive is in use.
Your computer supports up to four intelligent drive
electronics (IDE) devices. A 3 1/2-inch, IDE hard
disk comes standard in hard disk configurations. The hard
disk is assigned as drive C in your system and is selected
as the master device on the system board's primary
PCI/IDE connector.
The hard disk drive in your system is formatted and the
applications have been installed for you.
Using Your Computer 1-9

Advertisement

Table of Contents

Troubleshooting

loading
Need help?

Need help?

Do you have a question about the POWERMATE VP and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Powermate vp seriesPowermate vp75

Table of Contents