Power Management - NEC POWERMATE VP Manual

Power Management

1-36 Using Your Computer
Each computer system is Energy Star compliant and
incorporates power management features. These features
lower power consumption when there is no activity
detected from the keyboard, mouse, diskette drive, or hard
disk drive after a predefined period of time. As soon as
activity is detected the system resumes where it left off.
CAUTION: Do not turn off the system
while the power lamp is amber, the system is in
suspend mode. To do so can damage your hard disk
or data.
You can manually initiate a power-saving mode instantly
or you can set power management features to start
automatically. To enable Power Management, see
Chapter 2, Setup. The computer's power-saving functions
shut down all installed devices, video signals to the
monitor, and processor.
Your system has three different power consumption states:
n
Full-Power On mode
In Full-Power On mode, the system is in a fully active
mode of operation. Power to all components, such as
the monitor and hard disk drive, is on. When you power
on your computer, your system is in a Full-Power On
mode. A green system unit power lamp indicates that
the system is in a Full-Power On mode.