Integrated Technologies - NEC POWERMATE VP Manual

INTEGRATED TECHNOLOGIES

n
You cannot exit from an application program. In this
case, first try a warm boot in Windows.
n
You change the system configuration after editing the
CONFIG.SYS file.
n
You change your system configuration settings or
operating system and you want to start the system with
the new settings.
n
The monitor screen is black. If your screen is black, it
might only need a simple adjustment. Before you reset
the system, check the following:
Move the mouse or press the space bar to see if the
screen is blank because you have power manage-
ment features enabled.
Check the system unit power lamp. If the power
lamp is amber, press a key or move the mouse. You
might only need to change the mode of operation
from Suspend mode to a Full-Power On mode to
solve your problem.
Adjust the contrast and brightness controls on the
monitor.
Check that your monitor is properly connected and
the monitor power is on.
NEC designed your computer with technologies that help
you get the most out of your computer. Key integrated
features include:
n
Intel 75-MHz Pentium
n
A 320-pin zero insertion force (ZIF) OverDrive™
socket
n
256-KB secondary write-back or write-through cache
memory
microprocessor
Using Your Computer 1-33