4. If installing an IDE CD-ROM drive, also connect the audio cable (see the
instructions that come with the drive).
Cabling an Accessible 5 1/4-Inch Device
1. Connect the diskette drive signal cable connector to the signal connector on
the device (see the following figure).
2. Locate an available power connector.
3. Connect the power cable to the power connector on the device.
Storage Device Installation
The following subsections describe how to install 3 1/2-inch and 5 1/4-inch
devices. The installation procedures include:
T
removing the front panel
T
removing the CD-ROM/DVD drive
T
installing a 3 1/2-inch device
3-16 Option Installation
Connecting IDE Device Cables
Connecting an Accessible 5 1/4-Inch Device