Minitower Storage Device Installation; Installing An Accessible Minitower Storage Device6-53 - NEC POWERMATE VP Manual

Minitower Storage Device Installation

Installing an Accessible Minitower Storage Device
Use the appropriate procedures to install storage devices in
your system:
n
To install an accessible storage device, see "Installing
an Accessible Minitower Storage Device."
n
To install an internal storage device, see "Installing an
Internal Minitower Storage Device."
Use the following procedure to install an accessible stor-
age device in the system.
Follow the preinstallation instructions that come with
1.
your device, such as setting jumpers and switches.
See "Device Preparation" earlier in this chapter for
device preparation information.
If your 5 1/4-inch device comes with drive
rails, do not attach them. Remove any rails already
attached. See the documentation that comes with
the device.
Remove the system unit cover (see Chapter 5).
2.
WARNING: Be sure that system power
is off and the system and its peripherals are un-
plugged before you begin the installation procedure.
Adding Options 6-53