Seagate Barracuda - NEC POWERMATE PROFESSIONAL 9000 Service Manual

B-8 Jumper Settings
The default logical head number is set to 15 as follows (see Table B-4):
Jumper Position
I G
H
I G
H
I G
H
I G
H

Seagate Barracuda

The Seagate Barracuda 4.5-GB SCSI drive uses jumper blocks A3, A2, A1, and A0 to
configure the SCSI ID for the drive. See the documentation that comes with the drive for
more information on when and how to configure the drive. The SCSI ID jumpering is listed
below.
T
SCSI ID=0, no jumpers
T
SCSI ID=1, A0 jumpered
T
SCSI ID=2, A1 jumpered
T
SCSI ID=3, A1 and A0 jumpered
T
SCSI ID=4, A2 jumpered
T
SCSI ID=5, A2 and A0 jumpered
T
SCSI ID=6, A2 and A1 jumpered
T
SCSI ID=7, A2, A1, and A0 jumpered
T
SCSI ID=8, A3 jumpered
T
SCSI ID=9, A3 and A0 jumpered
T
SCSI ID=10, A3 and A1 jumpered
T
SCSI ID=11, A3, A1, and A0 jumpered
T
SCSI ID=12, A3 and A2 jumpered
Table B-4 IBM Deskstar 6.4-GB Logical Head
Number 15 Jumper Settings
E C A
F D B
E C A
F D B
E C A
F D B
E C A
F D B
Description
Device 0
Device 1
Cable select
Device 0 (forcing
device 1 present)